SM-350 PCB surface cleaning machine
The fully automatic PCB board cleaning machine is suitable for on-line cleaning of small board chips, dust, fiber, hair, skin chips, metal tiny particles and other foreign matters on the PCB bonding pad surface before solder paste printing or adhesive coating, Ensure the PCB surface is in a clean state, eliminate the poor welding, such as pseudo soldering, empty welding, warping, skew, etc. in advance, so as to reduce the hidden dangers and improve the product quality. Develop and design special equipment according to PCB cleaning requirements of SMT production line. Equipped with standard electrostatic removal function, completely eliminate electrostatic interference. Contact cleaning method, the cleaning rate of more than 99%, to ensure efficient, stable, lasting cleaning effect.
-
1¡¢Adopt touch screen control interface, Simple operation and easy to understand
2¡¢The feeding direction of the track can be switched freely, left → right or right → left
3¡¢The front end has brush function. Better ability to remove chippings, hair, etc
4¡¢In and out positions of PCB board are equipped with electrostatic removal device to reduce the bad and electrostatic damage caused by electrostatic during the process of mounting
5¡¢With counting function and numerical control speed display function
6¡¢Reminder function of replacement cycle of sticky paper
7¡¢According to the high cleaning demand of PCB, the anti-static cleaning brush and vacuum cleaner are developed to ensure the high efficiency and stable cleaning effect
|
Item
|
SM-350 Specifications / parameters
|
Remarks
|
|
PCB size
|
50x50~350x300 (LxW)mm
|
Large base plates have corresponding other models
|
|
PCB Thickness
|
0.5~3.2mm
|
Substrates below 0.4mm can be specially matched
|
|
Transmission height
|
900±25 mm
|
|
|
Cleaning Brush
|
1 pcs
|
|
|
Vacuum cleaner
|
1set
|
|
|
Sticky dust roller
|
Two roller front and back
|
|
|
Sticky dust paper
|
1 roll
|
|
|
Orbit direction
|
Left → right or right → left
|
Optional
|
|
Fixed edge of track
|
Front fixing or rear fixing
|
Optional
|
|
Track width adjustment
|
Manual
|
|
|
Antistatic device
|
Built-in
|
Special antistatic device optional
|
|
Gas source
|
0.4-0.5MPa
|
|
|
Power Supply
|
AC220V,50HZ
|
Special voltage to be specified
|
|
Dimension(mm)
|
890X600X1400
|
|
|
Weight
|
140KG
|
|
